Carrying capacity: 23 tonnes | Cubic Meters Heaped: 26m³
Twin 695mm dynamically balanced horizontal beaters have laser cut 10mm heat treated BORON steel flighting to improve strength and service life. Reversible hardened cutters manufactured using BORON steel are bolted and supported along the back edge, shred products giving an even and consistent feed on to the spinning discs
Manufactured from HARDOX, the 1.1 meter diameter spinning discs are fitted with multi-position BORON, reversable spreading blades. Blade angle is adjustable to achieve the correct spread patterns for a wide variety of materials. Spreading widths from 12 to 30 meters are possible depending on the density and nature of the product being spread
To fine tune spread patterns the angle of the blades on the disc can be adjusted through 5 positions
The lower section of the rear canopy is adjustable to help achieve the correct spread pattern with different products
Rocking beam offers strength and reliability in the toughest of conditions
530mm Built in (UK)/Bolt on (rest of world) flared extension sides are standard on 230. They add considerable carrying capacity to machines, spreader design load capacity should be checked relative to the density of the material to be carried. Bolt on extensions are used for machines being containerised for transport
Full width floor slats clear the whole floor eliminating the possibility of bridging – a problem sometimes encountered with multi slat floor systems. The socket fit design facilitates maintenance, which can be carried out in the field. It also allows the chain to pull straight, should a slat become bent
Grade 80, 20mm heavy duty chains are drawn by high tensile sprockets. Sprockets are fitted to the front floor shaft as well as the driven rear shaft, ensuring perfect alignment and timing of the chains, which, in turn makes for a more reliable floor drive. Each chain has a 50 tonne breaking certificate
The heavy duty, one piece, disc drive gearbox has 54 mm diameter, heat treated output shafts. The precision machined gearbox castings ensure perfect alignment of all the drive line components
The PTO drive line uses Heavy Duty T80 shafts with 1 ¾” splined connections suited for heavy, demanding materials
The 1000 series floor drive gearbox is hydraulically driven to ensure an even feed of material to the spreading mechanism at all times. With a reverse feature, any foreign object too large to pass through the beaters can be easily removed. An adjustable cross-line relief valve also delivers additional protection
The horizontal beaters are driven by heavy duty Renold roller chains which incorporate solid rollers and bushes. These are chosen for their unbeatable resistance to wear, fatigue and most of all shock loading. An automatic cam driven oiler keeps the chains and sprockets lubricated
For improved comfort when carrying heavy loads
A robust, simple and reliable floor tensioning system ensures floor chain tension can be easily adjusted in order to be kept to its optimum setting. Floor chains are visible from the exterior of the machine making it easy to judge when tensioning is required
70mm floor drive shafts rotate through polyester re-inforced composite bushes that contain a solid graphite filler, chosen for their high load applications in a variety of environments they are greasable, further extending their life. Bush highlighted in red
An extremely strong design and construction ensures that the door can be used as a grading device for light applications of materials as well as a device for retaining very runny products
The wide angle joint allows for turning on headlands with the PTO still engaged. It should be noted that the manufacturers recommend that you do not turn with the PTO under load
The wide angle joint allows for turning on headlands with the PTO still engaged. Instead of shear bolt protection a cam clutch can be fitted to PTO
As an option the rear canopy can be opened hydraulically to enable the machine to make windrows for composting or for ease of maintenance. Safety props are supplied and should be used prior to carrying out maintenance
This deflects the material down to the ground and limits the spread width on one side. This prevents material being spread through hedges, into water courses, etc
The in-cab electric remote floor speed control allows the operator to make adjustments to the floor speed while on the move
This options allows the operator to monitor door opening positions in relation to application rates
This option is designed to protect the PTO shaft from damage by the tractors lift arms
A choice of either 2 Line Air Only Brakes or Dual Supply (2 Line Air and Hydraulic) Brakes
A robust item designed with a sloping lid to reduce the build up of material
These ultra bright LED flashing/strobe lights are fitted as a pair and give a highly visable warning
The 21 Tonne drawbar uses a heavier spring and larger box section drawbar
Option to fit a swivel pick-up eye in lieu of fixed eye is available
Option to fit a 80mm Scharmuller spoon attachment in lieu of fixed eye is available
HMW plastic floor virtually eliminates the possibility of products sticking to the floor of the spreader. It can also improve the flow of products with high friction values. The material is extremely durable and is in addition to the spreaders standard floor construction
The stone guard extension gives more protection to the tractor cab from stones being thrown forward by augers/beaters
Made from 4mm pressed steel, these mudguards will help to keep the side of the machine clean
These bright LED marker lights are fitted to the front & rear of the mudguards and give a positive marker to the overall width of the machine
Rocking beam offers strength and reliability in the toughest of conditions. The addition of a self-steering rear axle greatly improves manoeuvrability in field and reduces tyre scrub when loaded
26 Tonne Sprung suspension improves ride comfort and weight distribution on uneven ground. The addition of a self-steering rear axle greatly improves manoeuvrability in field and reduces tyre scrub when loaded. Density of the material being carried should be checked so that the spreader design load is not exceeded
32 Tonne Sprung suspension improves ride comfort and weight distribution on uneven ground. The addition of a self-steering rear axle greatly improves manoeuvrability in field and reduces tyre scrub when loaded
The option of hydraulic suspension can be added to all tandem and tridem axle spreaders. It gives unrivalled stability, comfort and handling on uneven ground, loaded and unloaded. The addition of a lifting front axle aids in weight transfer and reduces wear. Hydraulic heavy duty drawbar enhances operator comfort and gives precise machine levelling so weight is spread evenly over all axles. 230 rear steer only, 380 HD front and rear steering
Standard wheels are 650/55 R26.5 10 stud.
Options: 650/65 R30.5, 710/50 R30.5 10 stud and 750/60 R26.5 10 stud
The rear clevis drawbar enables operator to attach and tow another spreader. Brake and light connections are fitted for safety. Please check local legislation in regards to towing
The rear drawbar with 80mm ball enables operator to attach and tow another spreader with a 80mm spoon attachment. Brake and light connections are fitted for safety. Please check local legislation in regards to towing
The Topcon Apollo spreader controller has all the features for today’s farming techniques. The standalone ISOCAN screen enables independent control of spreader with only 12 Volt power required from tractor (more…)
ISOBUS ECU only weigh cell system – The Topcon Apollo spreader controller has all the features for today’s farming techniques. ISOBUS ECU only is a “plug and play” system that requires a 3rd party ISOBUS screen in the tractor to control the spreader (more…)
On ISOBUS ECU only spreaders the feature of in loader cab scale App is available. On Apple and Android devices the Topcon ‘Cab Control’ App can be downloaded and via Bluetooth the weight in the spreader is mirror on to your device. Range up to 80m
The Topcon Apollo spreader controller has all the features for today’s farming techniques. The standalone XD + 12.1″ screen enables independent control of spreader with only 12 Volt power required from tractor (more…)
The Topcon Apollo spreader controller has all the features for today’s farming techniques. The standalone XD 7″ screen enables independent control of spreader with only 12 Volt power required from tractor (more…)
Spreaders with a weigh cell system can have an overload beacon fitted. This helps operators loading the spreader know when a desired weight has been achieved to reduce chance of overloading. Beacon is magnetic and can be moved to improve visibility. Not available on GT400
The GT 400 not only displays the live weight in the machine but also allows the operator to add the total weight up by pressing the start/stop button after every load. This simple weigh unit can be fitted through the whole range of Bunning muck spreaders from the 60 to the mammoth 380HD. The system is integrated with the same 20 tonne load cells as used on the popular and proven Topcon Apollo systems
As an option the machine can be manufactured to take weigh cells at a future date. The dummy weigh cells can be easily removed and replaced with full weigh cells.
While Bunning Blue or Bunning Green are our standard colours. From a BS or RAL number we can paint your machine in almost any colour
