Farmstar 80

Carrying capacity: 8 tonnes | Cubic Meters Heaped: 8 – 10.2m³

Gallery Video Overview Features Options Specifications Dimensions

Farmstar 80 TVA with slurry door, wide angle PTO and 18.4-34 wheels

Farmstar 80 TVA with slurry door and 18.4-34 wheels

Farmstar 80 TVA with slurry door ,240mm extensions, wide angle PTO and 520/85 R38 wheels

Farmstar 80 TVA spreading lime in the Highlands using simple canopy

Farmstar 80 TVA with slurry door, mudguards, simple canopy and 520/70 R34 wheels

Carrying capacity: 8 tonnes
Cubic Meters Heaped: 8 – 10.2m³
Body width 1500mm
Heavy duty fully welded construction
Handles all manure types and other materials
Dynamically balanced twin vertical augers
10mm thick auger flights from heat treated BORON steel
Augers protected by rubber cushioned drive
Auger gearbox protection via shearbolt
Reversible BORON cutters with re-inforcing plate
One piece auger gearbox arrangement
Robust, purpose built agricultural axle for application
Long lasting composit floor shaft bearings

Floor protected by cross line relief valve
High torque hydraulic motor
Quick fit socket on full width floor slats
Calibrated 16mm grade 80 high tensile floor chains
High tensile rear floor shaft
Variable floor speed control
1000 rpm PTO speed or 540 rpm
Single pole drawbar for tighter turning circle
Hydraulic brakes & handbrake
Full road lighting
Choice of standard colour, fully shot blasted with 2 pack paint finish
Choice of screwjack or pick up skid
3 years warranty, details available upon request

Twin dynamically balanced vertical augers

Twin 695mm diameter dynamically balanced vertical augers have flights laser cut from heat treated BORON steel to improve strength and service life. Reversible hardened cutters points manufactured using BORON steel are bolted and supported along the back edge, shred products leaving a wide and even spread. Three fixed position BORON steel bottom blades per auger give wider spread widths of materials that are either fine or wet

Full width floor slats

Full width floor slats clear the entire floor area, eliminating the possibility of bridging, a problem sometimes encountered with multi chain and slat floor systems. The “socket fit” design allows for easy maintenance which can be carried out in the field, it also allows the chain to pull straight should a slat become bent

Floor chains – 16mm

16mm, grade 80, heavy duty chains are drawn by high tensile sprockets, which are fitted to the front shaft as well as the driven rear shaft, ensuring perfect alignment and timing of the chains. Each chain has a 32 tonne breaking strain certificate. The same specification chain is used throughout the Mk4 range

One piece gearbox – Farmstar

The robust one piece SRT 8 gearbox is fitted to both the Lowlander 60 and 80. The precision machined castings house heat treated components which are kept perfectly aligned. Internal gear-sets are unique to Bunning and ensure that auger speeds are optimised to achieve excellent spread patterns

Floor drive gearbox

The 350 series floor drive gearbox is hydraulically driven to ensure an even feed of material to the spreading mechanism at all times. With a reverse feature, any foreign object too large to pass through the beaters can be easily removed. An adjustable cross-line relief valve also delivers additional protection

Rubber cushion drive coupling

Blue Auger With Blades And Drive Coupling

Especially developed to reduce shock loads to the auger drive gearbox, the rubber cushion arrangement located between the output shaft of the auger gearbox and the base of the auger contributes to the reliability and longevity of the machine

Floor chain tensioning

A robust, simple and reliable floor tensioning system allows easy adjustment ensuring that chains are kept to their optimum setting. The chains are visible from outside the machine making it easy to judge when tensioning is required. 50 mm high tensile shafts are used

Floor shaft bushes – Farmstar

50mm floor drive shafts rotate through polyester re-inforced composite bushes that contain a solid graphite filler, chosen for their high load applications in a variety of environments they are greasable, further extending their life

Automatic light covers

Machines fitted with slurry doors have Automatic Light Covers as standard. A simple mechanism triggered by the slurry door, moves the light cover over the lights as the slurry door begins to open

Ground Level Greasing

Easy greasing of top bearings via low level greasing points

Double acting Hydraulic guillotine slurry door (End Gate)

An extremely strong design and construction ensures that the door can be used as a grading device for light applications of materials as well as a device for retaining very runny products

Wide angle PTO assembly

The wide angle joint allows for turning on headlands with the PTO still engaged. It should be noted that the manufacturers recommend that you do not turn with the PTO under load

Simple canopy

Designed for use when spreading low applications of products like Lime and chicken litter, the canopy ensures that all material is spread by the bottom auger blades

240mm Bolt on extension sides

For increased capacity bolt on 240mm steel extension sides can be added. Spreader design load capacity should be checked relative to the density of the material to be carried

In cab electric floor speed control

The in-cab electric remote floor speed control allows the operator to make adjustments to the floor speed while on the move

Slurry door height indicator

This options allows the operator to monitor door opening positions in relation to application rates

Air brakes

A choice of either 2 Line Air Only Brakes or Dual Supply (2 Line Air and Hydraulic) Brakes

Drop down covers for deck cleaning

To help clean out the deck area around the bottom of the augers these covers can be opened to allow material and water to flow out

Tool box

A robust item designed with a sloping lid to reduce the build up of material

LED Strobe/Flashing Lights

These ultra bright LED flashing/strobe lights are fitted as a pair and give a highly visable warning

60-80 Swivel pick-up eye attachment

Option to fit a swivel pick-up eye in lieu of fixed eye is available

80mm Scharmuller spoon attachment

Option to fit a 80mm Scharmuller spoon attachment in lieu of fixed eye is available

Lift off augers

To enable the machine to be used for other jobs the auger assembly can be removed for the faster unloading of products such as grass, maize silage and even grain

Mudguards 60/80

Mudguards reduce spray and debris from tyres and give a width indication to traffic

LED front & rear Mudguard marker lights

These bright LED marker lights are fitted to the front & rear of the mudguards and give a positive marker to the overall width of the machine

Wheels – Farmstar 80

Standard wheel is a 460/85 R34 10 stud.

Options: 520/85 R38 10 stud, 580/70 R38 10 stud, 650/65 R38 10 stud and 710/70 R38 10 stud

ISOCAN weigh cell system

The Topcon Apollo spreader controller has all the features for today’s farming techniques. The standalone ISOCAN screen enables independent control of spreader with only 12 Volt power required from tractor (more…)

ISOBUS ECU only weigh cell system

ISOBUS ECU only weigh cell system – The Topcon Apollo spreader controller has all the features for today’s farming techniques. ISOBUS ECU only is a “plug and play” system that requires a 3rd party ISOBUS screen in the tractor to control the spreader (more…)

In loader cab scale App – ISOBUS ECU only

On ISOBUS ECU only spreaders the feature of in loader cab scale App is available. On Apple and Android devices the Topcon ‘Cab Control’ App can be downloaded and via Bluetooth the weight in the spreader is mirror on to your device. Range up to 80m

XD + 12.1″ screen weigh cell system

The Topcon Apollo spreader controller has all the features for today’s farming techniques. The standalone XD + 12.1″ screen enables independent control of spreader with only 12 Volt power required from tractor (more…)

XD 7″ screen weigh cell system

The Topcon Apollo spreader controller has all the features for today’s farming techniques. The standalone XD 7″ screen enables independent control of spreader with only 12 Volt power required from tractor (more…)

Overload beacon for weigh cell

Spreaders with a weigh cell system can have an overload beacon fitted. This helps operators loading the spreader know when a desired weight has been achieved to reduce chance of overloading. Beacon is magnetic and can be moved to improve visibility. Not available on GT400

Topcon GT400 simple weigh system

The GT 400 not only displays the live weight in the machine but also allows the operator to add the total weight up by pressing the start/stop button after every load. This simple weigh unit can be fitted through the whole range of Bunning muck spreaders from the 60 to the mammoth 380HD. The system is integrated with the same 20 tonne load cells as used on the popular and proven Topcon Apollo systems

Build weigh cell ready

As an option the machine can be manufactured to take weigh cells at a future date. The dummy weigh cells can be easily removed and replaced with full weigh cells.

Non Standard Colours

While Bunning Blue or Bunning Green are our standard colours. From a BS or RAL number we can paint your machine in almost any colour

Farmstar 80

Twin dynamically balanced vertical augers

Full width floor slats

Floor chains – 16mm

One piece gearbox – Farmstar

Floor drive gearbox

Rubber cushion drive coupling

Floor chain tensioning

Floor shaft bushes – Farmstar

Automatic light covers

Ground Level Greasing

Double acting Hydraulic guillotine slurry door (End Gate)

Wide angle PTO assembly

Simple canopy

240mm Bolt on extension sides

In cab electric floor speed control

Slurry door height indicator

Air brakes

Drop down covers for deck cleaning

Tool box

LED Strobe/Flashing Lights

60-80 Swivel pick-up eye attachment

80mm Scharmuller spoon attachment

Lift off augers

Mudguards 60/80

LED front & rear Mudguard marker lights

Wheels – Farmstar 80

ISOCAN weigh cell system

ISOBUS ECU only weigh cell system

In loader cab scale App – ISOBUS ECU only

XD + 12.1″ screen weigh cell system

XD 7″ screen weigh cell system

Overload beacon for weigh cell

Topcon GT400 simple weigh system

Build weigh cell ready

Non Standard Colours

VERTICAL AUGERS

HORIZONTAL AUGERS/DISC

CONTACT US

T: +44 (0) 1362 860352
F: +44 (0) 1362 860930
E: mail@gtbunning.co.uk

Farmstar 80

Twin dynamically balanced vertical augers

Full width floor slats

Floor chains – 16mm

One piece gearbox – Farmstar

Floor drive gearbox

Rubber cushion drive coupling

Floor chain tensioning

Floor shaft bushes – Farmstar

Automatic light covers

Ground Level Greasing

Double acting Hydraulic guillotine slurry door (End Gate)

Wide angle PTO assembly

Simple canopy

240mm Bolt on extension sides

In cab electric floor speed control

Slurry door height indicator

Air brakes

Drop down covers for deck cleaning

Tool box

LED Strobe/Flashing Lights

60-80 Swivel pick-up eye attachment

80mm Scharmuller spoon attachment

Lift off augers

Mudguards 60/80

LED front & rear Mudguard marker lights

Wheels – Farmstar 80

ISOCAN weigh cell system

ISOBUS ECU only weigh cell system

In loader cab scale App – ISOBUS ECU only

XD + 12.1″ screen weigh cell system

XD 7″ screen weigh cell system

Overload beacon for weigh cell

Topcon GT400 simple weigh system

Build weigh cell ready

Non Standard Colours

T: +44 (0) 1362 860352 F: +44 (0) 1362 860930 E: mail@gtbunning.co.uk

T: +44 (0) 1362 860352
F: +44 (0) 1362 860930
E: mail@gtbunning.co.uk